Model	EPC-VCE007UUCE122	EPC-VCE010UUCE122	EPC-VCE012UUDE122	EPC-VCE015UUDE122	EPC-VCE020UUDE122
Configuration	Total Cooling Capacity(kW)	7.5	10	12.5	15.5	20.5
	Air Volume(m3/h)	2500	3000	3200	5000	6000
	Reheating capacity(kW)	5.5	6			9
	Cooling way	Cooling only/Constant temperature
	Refrigerant	R410A
	Compressor	DC frequency conversion
	Fan type	EC
	IP Grade	IP20
Power parameters	Power way	220V 1PH~50Hz/60Hz		380V 3PH~50Hz/60Hz
	Current@100% loads(cooling only)	16A	23A	22A	14A	18A
	Current@100% laods(Constant Tem.)	26A	30A	22A	14A	18A
Dimension and Weight	Width(mm)	700		800
	Depth(mm)	550		650
	Height(mm)	1800				2100
	Installation way	Floor and Wall Mounted
	Application Ambient	Indoor
	Weight(kgs)	163	165	185	215	234
	Model	EPC-VCE007UFCE121	EPC-VCE010UFCE121	EPC-VCE012UFCE121	EPC-VCE015UFDE121	EPC-VCE020UFDE121
Configuration	Total Cooling Capacity(kW)	7.5	10	12.5	15.5	20.5
	Air Volume(m3/h)	2500	3000	3200	5000	6000
	Reheating capacity(kW)	5.5	6
	Cooling way	Cooling only/Constant temperature
	Refrigerant	R410A
	Compressor	DC frequency conversion
	Fan type	EC
	IP Grade	IP55
Power parameters	Power way	220V 1PH~50Hz/60Hz		380V 3PH~50Hz/60Hz
	Current@100% loads(cooling only)	16A	23A	22A	14A	18A
	Current@100% laods(Constant Tem.)	26A	30A	22A	14A	18A
Dimension and Weight	Width(mm)	700		800
	Depth(mm)	600		700
	Height(mm)	1950		2100
	Installation way	Floor and Wall Mounted
	Application Ambient	Outdoor
	Weight(kgs)	173	175	210	218	238

VCE Series Energy Storage System Cooling is designed with integrated frequency conversion, featuring high energy efficiency, easy installation, intelligent control, and high safety and reliability. This series of products are classified into constant temperature type and cooling type by function, and into wall-mounted, ground-mounted, and ceiling-mounted by mounting pattern. 

Convenient and reliable
• Integrated design, plug and play, complete isolation from inside and outside.
• Open protocol, support control according to cell temperature, more flexible on-site application.
• Independent cooling and heating set point control, closer to the actual operation of the battery.
• High protection level - IP55 protection level to ensure the dustproof and waterproof reliability of the chassis.
• The exterior of the chassis is sprayed with outdoor powder to improve the weather resistance and corrosion resistance of the unit.
• The EC fan has a large air volume and high residual pressure design, which can cope with the situation of adding air ducts on site.

Adapt to local conditions
• Support multi-scene installation: wall-mounted, floor-standing, ceiling-mounted, indoor/outdoor.

Energy saving and environmental protection
• True frequency conversion, more energy efficient, R410A environmentally friendly refrigerant.

Intelligent control
• Self-diagnosis, fault warning, rotational networking.
• Automatically adjust the operating status according to the cell temperature.

Easy to install
• Can realize full front maintenance, easy to operate.
• Product integrated design, easy to install, easy to transport in a centralized box or wall-mounted installation, easy to operate, no complicated operation, it can run automatically when it is powered on.
• The installation of the air conditioner does not intersect with the internal construction of the container to achieve more efficient installation and commissioning.
• Provide alarm signal and digital communication interface, when an abnormality occurs, the alarm signal will be output, and monitoring, control, etc. can be realized through the communication interface.

Rigorous testing
• Condensation verification.
• Full safety testing.
• High-pressure spray waterproof test.
• Frequent start and stop to verify oil return and liquid return.
• Piping stress, piping vibration verification.
• Wide voltage (at least ±15% fluctuation range) operation.
• Severe high temperature (at least 43°C), low temperature (-20°C) operation verification.

Click Here to download Brouchere